PluPlex

Projects

A look at the kinds of pipe jobs we take on every week, from a single hidden leak to complete system replacements.

Typical projects

Real problems, solved at the pipe

Each example below reflects a common type of job: what was wrong, how we approached it and what the owner was left with.

Technician repairing pump equipment indoors

Booster pump short-cycling

The problem: A pressure pump switching on every few minutes with every tap closed.

What we did: Isolated each branch to find a weeping union inside a wall cavity, opened one tile, remade the joint.

The result: Pump cycling stopped and the next water bill dropped back to normal.

Repairman in blue overalls working on equipment

Ageing GI supply replaced

The problem: Rusty water and weak pressure on the upper floor of a two-storey house.

What we did: Replaced the corroded GI risers and branches with PPR, added isolation valves on each floor.

The result: Clean water and even pressure at every outlet, with no more patch repairs.

Interconnected grey pipes mounted on an exterior wall

External pipe rerouting

The problem: Exposed pipes cracking where they crossed a sun-facing wall.

What we did: Rerouted the lines, switched to UV-suitable pipe and fitted proper clips and sleeves.

The result: A tidy, supported run that no longer flexes or splits in heat.

Gloved hands assembling a water pipe connection

Kitchen extension first fix

The problem: A new kitchen needed hot, cold and waste lines before plastering.

What we did: Planned the route with the contractor, fitted and pressure-tested all lines in one visit.

The result: Walls closed on schedule with tested pipework and a photo record behind them.

Worker welding steel pipe sections

Plant room joint repairs

The problem: Several dripping joints on a building water supply manifold.

What we did: Scheduled an out-of-hours shutdown, remade the failed joints and replaced two worn valves.

The result: The building was back on supply before opening time with no leaks.

Water meters connected by supply pipes

Meter-side leak located

The problem: Water loss showing at the meter with no visible damp anywhere.

What we did: Pressure-tested the buried supply line, found a split near the meter and replaced the section.

The result: Meter readings returned to normal usage the same day.

Diagnose first

Every job starts with testing.

Agree in writing

Price and scope approved by you.

Fix properly

Rated fittings, correct joints.

Prove it

Pressure test before handover.

Have a similar job?

Send us a short description or a photo and we will suggest the right approach and a cost range.

Scroll to Top